I had this comment a while back on one of my older posts:
|Hi, your prints are really nice. I am trying to get that with a Prusa Mendel but it is impossible. Could you help me with Skeinforge settings?
I don’t use much in the way of settings these days. I use SFact on pretty much its default settings. The only changes I make are to the layer height (0.33mm), and the number of extra shells (0 to 1, depending on the print). Even the retraction is now kept on the default settings.
I keep speed very low for the first layer, 15mm/s for the perimeter, 20mm/s for infill. This ensures excellent adhesion with the heated bed, at 220 degrees. After the first layer, I turn the temp down to 197 degrees, and set the speed to 30mm/s for perimeter, and 60mm/s for infill.
When I was complaining about the print quality of the Prusa in a recent post, I didn’t really mean it. Look at these photos.
Fantastic. X, Y and Z axes are all spot-on with their precision. But I’d like to do better still, particularly in getting rid of ‘dribble’ from the hot end.